PerkinElmer’s amorphous silicon flat panel detectors use a solid state sensor as a two-dimensional photodiode array. The detectors are well suited to perform digital image acquisition and contain all drive and read-out processing electronics including an X-Ray interlock. X-Rays are converted into light using different scintillators. The information is digitized in 16 bit to achieve highest dynamic range and contrast.These fully digital X-Ray detectors can be used in a variety of industrial applications such as portable radiography, industrial non-destructive testing (NDT), PCB inspection, and pipeline inspection.

PerkinElmer’s XRD 8-inch category consists of the following: XRD 0840 and the XRD 0820 sub-series with a resolution of 400 or 200 µm pixel size. All detectors have a 16 bit digital resolution and a field of view of 20 cm x 20 cm. Both the XRD 0840 and XRD 0820 detector series are also available in an industrial version (IND) for high X-ray dose applications.

NEW PerkinElmer is pleased to present their new XRD 0820 series with an improved frame rate of 7.5 fps at 200 µm pixel size and 15 fps in a binning mode at 400µm.

A complete list of our available standard 8-inch X-ray detectors is shown below. Click on the Detector Series of interest for a link to the datasheet.

• XRD 0820 AN - 200µm Pixel Size, 40-225 Energy(keV), 7.5fps; 400µm Pixel Size, 15 fps (2x2 binning)
• XRD 0820 AN IND - 200µm Pixel Size, 40-225 Energy(keV), 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)
• XRD 0820 CN - 200µm Pixel Size, 25-225 Energy(keV), 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)
• XRD 0820 MN IND - 200µm Pixel Size, 40-450 Energy(keV), 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)

• XRD 0820 AN - 200µm Pixel Size, 40-225 Energy(keV), 7.5fps; 400µm Pixel Size, 15 fps (2x2 binning)
• XRD 0820 AN IND - 200µm Pixel Size, 40-225 Energy(keV), 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)
• XRD 0820 CN - 200µm Pixel Size, 25-225 Energy(keV), 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)
• XRD 0820 MN IND - 200µm Pixel Size, 40-450 Energy(keV), 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)
   
• XRD 0840 AN - 400µm Pixel Size, 40-225 Energy(keV), 15 fps
• XRD 0840 AN IND - 400µm Pixel Size, 40-225 Energy(keV), 15 fps
• XRD 0840 CN - 400µm Pixel Size, 25-225 Energy(keV), 15 fps
• XRD 0840 MN IND - 400µm Pixel Size, 40-450 Energy(keV), 15 fps

The XRD 16-inch aSi panel category consists of the: XRD 1640, the XRD 1620, and new XRD 1621 with a resolution of 400 µm or 200 µm pixel size. All detectors have 16 bit digital resolution and a field of view of 41 cm x 41 cm. PerkinElmer’s aSi digital X-ray detectors are suited to a wide range of X-ray energies from 40 keV up to 15 MeV.

NEW PerkinElmer is pleased to present their new XRD 1621 AN series with an improved frame rate of 7.5 fps at 200 µm pixel size and 15 fps in a binning mode at 400µm. Click here for an XRD 1621 AN datasheet.

A complete list of our available standard 16-inch X-ray detectors is shown below. Click on the Detector Series of interest for a link to the datasheet. PerkinElmer’s X-ray detectors are available in a variety of versions such as Enhanced Speed (ES) and Continuous Scan (CS) to suit your specific imaging needs.

• XRD 1620 AN - 200µm Pixel Size, 3.5 fps
• XRD 1620 AN CS - 200µm Pixel Size, 3.75 fps
• XRD 1620 CN - 200µm Pixel Size, 3.5 fps
• XRD 1620 CN CS - 200µm Pixel Size, 3.75 fps
• XRD 1621 AN - 200µm Pixel Size, 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)
• XRD 1621 CN - 200µm Pixel Size, 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)

• XRD 1621 AN - 200µm Pixel Size, 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)
• XRD 1621 CN - 200µm Pixel Size, 7.5 fps; 400µm Pixel Size, 15 fps (2x2 binning)
   
• XRD 1640 AN CS - 400µm Pixel Size, 7.5 fps
• XRD 1640 AN ES - 400µm Pixel Size, 15 fps
• XRD 1641 AN - 400µm Pixel Size, 15 fps
• XRD 1641 CN - 400µm Pixel Size, 15 fps

While many of Perkin Elmers flat panel detector are suitable for use upto 15MeV, such operation is only possible if the detector electronics are appropriately shielded against x-rays.

Shaw Inspection Systems can provide a range of integrated sheilding systems that allow the panel to be operated at, 2, 4, 9, and 15MeV.